Reference: 4927120
Brand: Ernst & Friends Gmbh
Reference: KAR4
Reference: SIA2000
Brand: SIA Abrasives
Banner
The alloys and dimensions of Lampert‘s welding wires have been specially selected to complement the PUK,
and are ideally suited to welding with PUK precision welding devices.
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
- Gold 18K 750/000, 500mm x 0,25mm
- Gold 14K 585/000, 500mm x 0,25mm
- White gold 18K 750/000, 500mm x 0,25mm
- Platinum 960/000, 500mm x 0,25mm
- Silver 940/000, 2000mm x 0,25mm, 1000mm x 0,35mm
- Palladium-Silver 500/000 500mm x 0,40mm, This Pd/Ag/Cu welding wire with a high portion of palladium is particularly well-suited for repair welds on alloys that are only weldable to a limited degree with themselves or with each other. The welding wire stands out due to its excellent adhesion properties and exceptional toughness. It is therefore frequently used as a "bridging metal" between awkward alloys (colour grey)
- Pure titanium, 1000mm x 0,30mm
- Aluminium ALMG3, 2000mm x 0,5mm, Welding wire ALMG3 for applications on Al-Mg alloys up to 3% magnesium e.g. AlMg3. The welding metal can be anodised
- Aluminium ALSI, 2000mm x 0,5mm, Welding wire ALSI for connections and application on aluminium-silicon alloys up to 12% Si, and for different types of aluminium alloys together
- Stainless steel CMS, 1000mm x 0,40mm
- Steel GS2, 1000mm x 0,20mm, The welding wire GS2 is suitable for applications with a higher hardness on tools subject to heavy wear and pressure. It is also good for platings on unalloyed and low-alloyed steels. Hardnesses up to 58HRC.
- Steel GS55, 1000mm x 0,20mm, The welding wire GS55 is a martensitic chromium steel with good stability and wear resistance. It is suitable with shock and impact stress and is heat treatable. For highly wear-resistant application welding on tools. Hardnesses up to 61HRC
- Copper alloy C45, 2000mm x 0,35mm, 2000mm x 0,5mm, 2000mm x 0,7mm, Free-flowing copper alloy for smooth, dense and non-porous welding on copper, copper-zinc and copper-silicon alloys and for deposition welding on copper alloys and unalloyed ferrous materials. Corrosion resistant and very strong weld metal – very tough at low temperatures. Virtually identical in colour to pure copper.
- Silver JSS 760/000, 2000mm x 0,25 mm, 2000mm x 0,35 mm, 2000mm x 0,45mm, Excellent coloring for working on (sterling) silver. Excellent flow properties. Excellent welding results with no centerline-cracking. Excellent ductility of the welded area. The wire Silver JSS has a lower standard (Ag760) and a lower melting point (765 °C / 1409 °F) than pure or sterling silver (Ag925).
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: 28590
Brand: PROXXON
Reference: 11062010
Brand: Friedr. Dick GmbH & Co. KG
Reference: 30044HP
Brand: Edenta
Reference: OBB E
Reference: 307.20G
Brand: Pepetools
Reference: 890.104.016
Brand: Edenta
Reference: 1479V
Brand: TANITA
Reference: 11541510
Brand: Friedr. Dick GmbH & Co. KG
Reference: 10311040
Brand: Friedr. Dick GmbH & Co. KG
Brand: MIRKA
Reference: 8201
Brand: O.M.O. srl
Reference: 170.485
Brand: A & F Switzerland SA
Reference: 863.104.012
Brand: Edenta
Reference: 100430
Brand: Lampert
Reference: 200 220
Brand: Lampert
The alloys and dimensions of Lampert‘s welding wires have been specially selected to complement the PUK,
and are ideally suited to welding with PUK precision welding devices.
check_circle
check_circle